Some FIBC requires spout holes for discharge of stored material, for this spout hole should be cut in the fabric before stitching the bags.

In our M/C Spout hole of different sizes can be cut in the fabric by the spout dies, which is changeable. M/C is supplied with the different sizes of spout dies based on the customer requirement.

Insulated heater is fixed on the spout die. Temperature is controlled by the PID control provided in the panel. 10 15 pieces of fabric can be cut at a time. Measuring scale is provided for setting the position of the spout hole. Pneumatic cylinders are provided to operate the die.

The delivery time of the semi automatic spout cutting m/c is approximately 30 to 45 days